Configure GPS tracker TK104

Content Specifications.
Dimensions 64mm x 46mm x 17mm (1.8 “* 2.5” * 0.65 “)
Weight 50g
GSM / GPRS network
Band 850/900/1800 / 1900Mhz or 900/1800 / 1900Mhz
Chip GPS Chip SIRF3
GSM / GPRS Simcom Sim340 or Simcom SIM300 module
GPS sensitivity -159dBm
GPS precision 5m
Time for the first link to the satellite
First start-up 45s
After configuring 35s
Active 1s continuously
Car charger
12-24V input
5 V output
Domestic Charger
110 – 220V input
5 V output
Battery Variable charge 3.7V 800mAh Li-Ion
Waiting 80 hours
Storage temperature. -40 ° C to +85 ° C
Operation Temp. -20 ° C to +55 ° C
Humidity 5% – 95% non-condensing

Configure GPS tracker TK104

You must first make sure that the card has no active call diversion and that the PIN code is disabled.

1 Open the back cover, and remove the battery.
2 Push the aluminum cap along and turn it to the left.
3 Insert the SIM card into the holder, and place it in the original position.

Charge the battery to the maximum for the first use.
Please use the battery and the charger supplied by the manufacturer. This battery is Li-ion, which will give an autonomy of about 48 hours of use. After the first use, the battery can be fully charged in about 3 or 5 hours.

Take due precautions when handling this battery as it has chemicals
harmful and badly handled (please do not hit it with sharp objects, as it could explode or start a small fire.
Charge the battery in the time indicated so that it continues to work

• Put the SIM card and the battery in place.
• Switch on the unit outdoors, by pressing the “on / off” key until the
indicator stays on.
• For your first use, configure the device by default.
• Wait for 10 or 40 seconds and watch as the unit begins to work and acquire GSM signals, as well as GPS signals. The indicator will continue to flash every 4 seconds if the signal has been received. Otherwise the light will stay fixed and on.