Configure GPS tracker GT02A

Dimension 90(L) x 45(W) x 13.5(H) mm
Weight 45g
Operation Temperature -30℃ – 70℃
Operation Voltage 9-36vDC
Humidity 20% – 80%
GSM Frequencies 850/900/1800/1900 MHz
GPRS Class 12
GPS Sensitivity -159dBm
Acquisition Sensitivity -144dBm
Position Accuracy 10m
Cold Start: <38s
Warm Start: <32s
TTFF (Open Sky)
Hot Start: <2s
GSM/GPS Antenna Built-in design
LED Indicator GSM-green, GPS-blue, Power-red
Data Transmit TCP, SMS
Non-movement Detection Movement alarm based on built-in 3D
motion sensor
Mileage Report Track by time/distance interval

Charging cable

Configure GPS tracker GT02A

Relé

Configure GPS tracker GT02A

Manual

Configure GPS tracker GT02A

Locking bolts

Configure GPS tracker GT02A

Configure GPS tracker GT02A

This process must be carried out by a mechanic. Although the image of the device does not correspond to yours, do not worry, the process is the same

Identify and verify that you have all the parts to follow. As shown below:

Configure GPS tracker GT02A

Remove the PIN of the SIM Card (This step is essential, since by default all SIMs come with PIN activated). A mobile phone will be necessary. Below I leave links for you to carry out this process:

Place the SIM turn on the GPS. According to images below:

Configure GPS tracker GT02A

In the sequence we are going to make the connections of the tracker:

Connect the end of the cable with connector to the Tracker.
Below is a diagram of how to connect the whole system. A very important point is to check if the colors of the wires coming out of the relay match the photo, (however you have the reference of the relay)

Configure GPS tracker GT02A

 

Finally you have to turn on the Tracker, moving the button indicated in the image to follow, and then save the Tracker in a little visible area.

Configure GPS tracker GT02A

Now just need to download the application and start using it.